1 Gallon	List  59.95	Our Price     47.96
5 Gallons	List  280.95	Our Price   224.76

Seal-It! (Deep Penetrating Cleaner/Sealer) Works three ways, it cleans and etches surfaces in preparation for the application of Aquapoxy permanently sealing and densifing the matrix in the process. Moreover, it increases the bonding power of Aquapoxy by up to 300% making it a compelling choice. Choose it in lieu of TS-695 Etching Cleaner to prevent moisture intrusion or hydrostatic pressure up to 60 PSI!

Seal-It! is a chemically reactive penetrating sealant that works internally within the concrete matrix; not as a surface sealant. It is not a coating, it does not leave a finish behind. It does not alter or affect the color or texture of the surface treated. 100% is absorbed by porous surfaces creating a permanent water barrier increasing compressive and flexural strength in the process. It contains a catalyst that seeks out and reacts with moisture, free alkali (lime), calcium hydroxides and other particles present within the matrix fusing them together creating an impenetrable silica. The entire surface penetrated is impregnated and converted turning the entire structure into a solid mass preventing the movement of moisture permanently. 

Acceptable for use on Portland cement, concrete, gunnite, stucco, plaster, porous tile, shotcrete, gunnite and mortar. It retards penetration of grease, oils, wax and acids. Cures new concrete uniformly, resists hair checking, retards pitting, dusting, rutting and displaces grease and oil. Densifies and hardens surfaces extending the life of treated surfaces by reducing or eliminating wear due to abrasion, freeze-thaw and salt attack.

May require two or three applications on problem surfaces. Treats 150—200 square feet per gallon per application. Point of refusal is reached at three applications. Apply by Sure-Flow or pump-jug sprayer. It is zero VOC, nontoxic and not HAZMAT.  Available in one gallon and five gallon containers.

MSDS     Performance Data Sheet   Application Instructions