Concrete Repair Material

TS-670 EMCU Moisture Cure Urethane Sealer is used for filling, repairing and sealing cracks, seams, voids and joints on floors, boats, and swimming pools as well as in architectural applications. A superior grade elastomeric polyurethane sealant that utilizes moisture present in air to achieve the cure eliminating the need for mixing resin with catalyst. It is easy to use, versatile and highly durable. The high solid content resin (96% solid) will not sag when applied to vertical and overhead surfaces and has a low shrink ratio. It will bond to most any substrate including concrete, fiberglass, aluminum, tile, masonry, plaster, steel, vinyl and wood. It is acceptable in constant water immersion duty when over-coated with protective waterproof paint. The tube fits easily in any standard thrust type calking gun. It is low odor and low VOC. The product is supplied in individual tubes for use with typical caulking guns with a suitable thrust ratio. It is available in single tubes or cases of 24 pieces per package (300ml per cartridge is 10.1 fl oz). Color is Limestone (light gray). Complies to ASTM C920 Type S, Federal specification TT-S-00230C Type II, Corp of Engineers CRD-C-541, Type II, Class A.

Power-Patch (TS-671) ) is an expanding, fast setting, pourable hydraulic type cement used to patch repair and fill voids, breaks, cracks and joints in concrete, masonry, tile, terrazzo cement. It is acceptable for use on floors, swimming pools, stairs, ramps, landings, walls or most any cementious surface. It saves repair dollars because it ensures permanent results making it perfect for use in commercial, industrial and residential applications. When mixed with water to a pourable consistency, it flows and seeps into place filling voids and cracks thoroughly. It takes and initial set within 15 minutes. It dries quickly, harder than concrete in less than one hour. Once fully cured it has more than twice the strength of fully cured conventional concrete. Within one hour it develops a compression strength of 4500 LBS. per square inch. Its adhesion is due to expansion, and when fully set it grips metal to concrete permanently. Color is light gray. Available in 5LB, 10LB and 50LB packages.