.
TS-910 Aquapoxy
Polyamine Epoxy Primer
Performance Data
COLOR(S):
White (tintable) & clear.
PRODUCT TYPE:
2-Component Waterborne
Epoxy-Polyamine Primer.
DESCRIPTION:
A
premium quality, interior/exterior, two component, water
reducible, gloss epoxy primer. Designed for use on properly
prepared concrete surfaces.
PHYSICAL CHARACTERISTICS:
VISCOSITY:
65-74 k.u.
(mixed)
DRY TO TOUCH:
3 hours
WEIGHT SOLIDS:
74% +/- 2 (mixed)
VOLUME SOLIDS:
64% +/-2 (mixed)
TACK FREE:
5 hours
TIME TO RECOAT:
24 hours
POT LIFE:
3-4 hour temp dependant, stir regularly and add water to
extend pot life.
WEIGHT PER GALLON:
11.3 lbs. per
gal. (mixed)
DRY HARD:
12 hours
FOOT TRAFFIC:
12 hours
VEHICLE TRAFFIC:
48 hours
V.O.C.: <
1 grams per liter (mixed)
FLASH POINT:
N/A.
PACKAGING:
1
or 4
gallon containers ( 1 and 4 gallon kits )
PRACTICAL COVERAGE:
200-250 square feet per gallon @ 4 mils dry film thickness.
SURFACE PREPARATION:
New
Concrete Floors:
Allow concrete to cure for at least thirty (30) days before
coating.
Old
Concrete Floors:
Blast, grind, sand or use TS-695 Etching Cleaner according
to label directions. Allow to dry.
APPLICATION:
This is a two-component system that is mixed just before
using. MIX: 1 Volume Component A to 3 Volumes Component B.
Induction time of 1/2 hour should be allowed before
application. Recommend using Aquapoxy Primer to increase
film build and provide a sound base coat. May be rolled @
3-4mils using 3/8” non-shedding cover or apply by squeegee
up to 10-12 mils.
THINNING:
Not usually required but thin if necessary with up to
one-half pint of clean water per gallon after mixing.
CLEAN-UP:
Tools and equipment may be cleaned immediately with soap and
water.
