.
TS-695
Etching Cleaner
Performance Data
COLOR(S):
Clear, Colorless Liquid.
PRODUCT TYPE:
Phosphoric Acid Metal & Concrete Pretreatment
Solution.
DESCRIPTION: TS-695 Etching Cleaner
cleans concrete, fiberglass, aluminum, steel and many other
surfaces. It attacks rust, corrosion and oxidation from
crevices as well as smooth surfaces. Oil, grease, dirt,
exhaust and chemical stains disappear quickly and
completely. Removes easily and safely exhaust and chemical
stains, oxides and corrosion from aluminum, zinc and cadmium
plate as well as iron and steel. TS-695 Etching Cleaner
is an
excellent pretreatment solution to be used on concrete
floors prior to application of coatings and sealers by
removing unwanted contaminants from the floor and
neutralizing lime and by-products on the surface which may
seriously impair the coatings’ ability to form a good bond
to the concrete.
Intended Use:
Removes stains, oxides and corrosion from
metal and other surfaces.
PHYSICAL CHARACTERISTICS
VISCOSITY: N/A
DRY TO TOUCH: N/A
WEIGHT SOLIDS: N/A
TACK FREE: N/A
VOLUME SOLIDS: N/A
TIME TO RECOAT: N/A
WEIGHT PER GALLON: 9.70 lbs. per gal.
DRY HARD: N/A
V.O.C.: 79 grams per liter
COLOR RANGE: N/A
FLASH POINT: N/A
PACKAGING: 1 or 5 gallon containers
BATCH: Stock
PRACTICAL COVERAGE: Approximately 200
square feet per gallon on masonry surface--500 square feet
per gallon on metal and glazed tile.
DIRECTIONS FOR USE:
Use full strength
to condition
all metals prior to painting. Excellent for etching
galvanized metals prior to painting. Rinse surfaces
thoroughly with clear water before solution dries and resets
on the surface.
Do not
use in direct sun or on hot surfaces. Before painting
concrete: Use to etch concrete floors, walls, walks, patios,
steps and swimming pools. Apply 15-30 square feet at a time
agitating with a stiff brush for 10 minutes. Rinse or flush
thoroughly. Damp mop surface to pick up excess moisture and
residue. Allow surface to dry before applying finish. Use to
brighten, clean and remove oxidation on copper, brass,
marble vitreous china, on fixtures, boats, shower stalls,
heating, refrigeration and water systems.
Use full strength or one part
TS-695 Etching Cleaner
to two parts water.
